PRW "Pedro" Arms & Caster Block combo

PRW "Pedro" Arms & Caster Block combo
PRW "Pedro" Arms & Caster Block combo PRW "Pedro" Arms & Caster Block combo
Product Code: prwpedro-combo
Availability: In Stock
$69.95

Available Options


* Kickup Angle:



Qty:  
  - OR -  

Pedro is a nickname that many in the r/c industry call Pete D'Agnolo. Pete has been working with the PRW design crew on a few projects.

Here are the new Pedro arms, the arms are made of the highest quality delrin. Look closely and you will see the ball stud holes are angled to prevent the shock from binding. We utilized two different designs in one arm, this arm will fit any Terminator based car on the market. It will offer them a standard and wide width. We made the arm with two outer hinge pin holes, which both use a 2-56 capture screw. The inner hinge pins also use a 2-56 capture screw or use the standard hinge pins with e-clips...either way it looks sharp! - See more at: http://www.pembertonraceworks.com/index.php?route=product/product&product_id=238#sthash.9bCCvo78.dpuf

Here are the new Pedro arms, the arms are made of the highest quality delrin. Look closely and you will see the ball stud holes are angled to prevent the shock from binding. We utilized two different designs in one arm, this arm will fit any Terminator based car on the market. It will offer them a standard and wide width. We made the arm with two outer hinge pin holes, which both use a 2-56 capture screw. The inner hinge pins also use a 2-56 capture screw or use the standard hinge pins with e-clips...either way it looks sharp! - See more at: http://www.pembertonraceworks.com/index.php?route=product/product&product_id=238#sthash.9bCCvo78.dpuf
Here are the new Pedro arms, the arms are made of the highest quality delrin. Look closely and you will see the ball stud holes are angled to prevent the shock from binding. We utilized two different designs in one arm, this arm will fit any Terminator based car on the market. It will offer them a standard and wide width. We made the arm with two outer hinge pin holes, which both use a 2-56 capture screw. The inner hinge pins also use a 2-56 capture screw or use the standard hinge pins with e-clips...either way it looks sharp! - See more at: http://www.pembertonraceworks.com/index.php?route=product/product&product_id=238#sthash.9bCCvo78.dpuf

We didn't forget you guys and gals who like the CW style front end. We designed a bulkhead caster block that fits our new arms and any CW based designed car. Made from high quality aluminum, the new bulkhead caster block comes in a 10 deg. and 15 deg. option. No more cutting arms to fit, just bolt on and go! We also put the shock tower mount in the center of the bulkhead castor block, this allows you to run the shocks on the front or rear of the arm....and both using the angled ball stud holes.

Includes Pedro arms, blocks, hinge pins and capture screws

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: